Stainless Steel Sample Champ

 

Gallons Per Minute

N/A

Pumping Depth (DTW)

180

The SS Sample Champ pump is capable of pumping up to 180 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous purging of groundwater wells. Proactive's Stainless Steel Pumps are patented for their unique design (#7252141).

Simple to use and extremely powerful!

The SS Sample Champ is capable of pumping up to 180 feet from ground level to water level. Simply, connect the pump connector to the Sample Champ “LCD” Controller, then to a 12 volt battery, energizing the pump. Sound Simple? We think so.

For the harsh environments!

The SS Sample Champ can operate under harsh conditions with higher turbidity.

The SS Sample Champ has been installed in hundreds of remediation sites using pump and treat systems.

The SS Sample Champ can also be used with solar panels for long term remediation sites!

Why choose the SS Sample Champ?

Simple to use! Runs off any 12 volt DC batteries.

Lifts up to 180 feet deep from ground level to water level!

Reliable design is suitable for continuous purging of groundwater wells.

Low Flow Sample as low as 10 M/L per minute, from any depth, when using the Sample Champ “LCD” Controller and low flow control valve (Sold Seperately).

Easy to read LCD display conveniently placed on top of the Sample Champ “LCD” Controller makes adjusting and reading the discharge rate a breeze!

Computer engineered bottom debris filter screen allows operation under harsh conditions with higher turbidity.

Long lasting, high performance pump motor lasts over 400 hours under normal working conditions.

Simple to clean and decontaminate!

The SS Sample Champ is only 1.82" OD and constructed of three high polished stainless steel parts:

1. The replaceable motor module
2. The motor housing top connector
3. The outside pump housing

SS Sample Champ "30 Second Change Out Motor Design!" - A Great Value!

Should the motor fail, the field technician can change out the SS Sample Champ motor in less than 30 seconds! The SS Sample Champ comes complete with one additional motor module.

The main wear out parts consisting of the motor and seal all have been incorporated in a single replaceable motor module. Should the existing replaceable motor module fail in the field, a new replaceable motor module can quickly be installed within 30 seconds by a simple quarter turn twist! Once installed, your pump is essentially new and will have a life span identical to a
new pump.

Sample Champ "LCD" Controller

This Controller is specifically engineered for the SS Sample Champ®. The Sample Champ “LCD” Controller is constructed of a heavy duty steel casing. For added safety, this controller is engineered with a reverse polarity protection circuitry that incorporates a 30 amp fuse to protect the Controller and user.

The controller is also protected with a current limitation circuitry and thermal overload protection. Easy to read LCD display conveniently placed on top of the Sample Champ “LCD” Controller makes adjusting and reading the discharge rate a breeze!

And, with the Sample Champ “LCD” Controller, the Field Technician can control the water discharge all the way down to 10 M/L per minute from 180 feet or less when used with the low flow control valve.

480 WATTS (MAX)

12-15 At Source

20 AMPS

LENGTH 6.5" / DIAMETER: 1.82"

HIGH POLISH STAINLESS STEEL

3/8" ID POLY TUBING, TEFLON WIRE OPTIONAL

130 FEET OF HEAVY DUTY 12 GAUGE PVC WIRE

POWER CONSUPTION:

VOLT RECOMMENDATION:

MAXIMUM AMP OUTPUT:

MEASUREMENTS:

CONSTRUCTED:

REQUIRED TUBING:

SUPPLIED WITH